6 Common Plumbing Problems Plaguing Homeowners

Plumbing is one of the biggest components of your entire home, with a plumbing installation project costing $12,000 on average. When you’ve spent that much on your plumbing system, the last thing you want is for it to fail.

But like all systems in your home, your plumbing system will, on occasion, experience problems. The secret is to deal with these plumbing problems quickly, so they don’t become bigger problems.

So, what plumbing issues disturb US homeowners the most? Keep reading to find out.

1. Leaky Pipes

One of the most noticeable plumbing problems is leaky pipes. Leaky pipes can cause a lot of water damage if they’re not fixed promptly. On average, leaks can account for almost 10,000 gallons of water lost per house each year.

The good news is that leaks are usually easy to spot. Common signs include water spots on the ceiling, walls, or floor. You may also see pooled water around the base of plumbing fixtures or notice higher than normal water bills.

Leaks may have many causes. The most common is corrosion of the pipes. This can happen when water sitting in the pipes for long periods of time begins to eat away at the piping material.

Another cause may be loose plumbing fixtures or fittings that aren’t properly tightened.

Regardless of the source of the problem, it’s important to take action immediately. Depending on the severity of the issue, decide whether to fix it yourself or call a plumber. If you’re dealing with a small plumbing leak, tightening the plumbing fitting or replacing the washer in a faucet may resolve the issue.

For more serious leaks, however, it’s best to contact professional plumbing services. They’ll be able to quickly identify the source of the problem and make the necessary repairs. An expert will also offer guidance on how to avoid plumbing problems like this in the future.

2. Clogged Drains and Toilets

Clogged drains and toilets are another plumbing problem that homeowners often experience. Clogs can be caused by many things, including hair, grease build-up, or even objects that have been flushed down the toilet.

You’ll know you have a clog if water starts to back up into the sink or tub when you turn on the faucet. You may also notice that the toilet water rises when you flush. Clogs can also cause slow draining sinks and toilets.

There are a few things you can do to try and clear a clog yourself. For example, plungers are often effective in dislodging toilet clogs. You can also try using a plumbing snake to break up drain clogs.

If these methods don’t work, call a residential plumbing services provider. They have the right tools and experience to clear the clog without damaging your plumbing. After a professional drain cleaning service, you’ll notice that water flows effortlessly.

3. Low Water Pressure

Ever turned on the shower only to have a trickle of water come out? Or tried to run the dishwasher only to find that it can’t seem to get enough water to fill up? If so, you’ve experienced low water pressure.

Low water pressure is often caused by a leak in the plumbing. This can happen if pipes are corroded or damaged. It can also be caused by a clog in the plumbing or even by mineral deposits that have built up over time.

If you’re experiencing low water pressure, there are a few things you can do to try and fix it. For example, checking for leaks in the plumbing is a good place to start. You should also check to see if any plumbing fixtures are turned off or partially closed.

4. Water Heater Issues

Your water heater is an important component of your plumbing, and when it isn’t working properly, it can cause a lot of problems. Some common water heater issues include strange noises, leaks, or no hot water.

One of the most common causes of water heater problems is sediment build-up. This happens when minerals in the water settle at the bottom of the tank and form a hard layer. Sediment build-up can cause the water heater to overheat and break.

If you think your water heater might have sediment build-up, it’s important to have it checked by a professional. They’ll be able to clean out the tank and get it working properly again.

5. Running Toilet

A constantly running toilet is not only annoying, but it’s also a waste of water. This plumbing problem is usually caused by a faulty flapper valve. The flapper valve is located at the bottom of the toilet tank and is responsible for stopping the flow of water once the tank is full.

Check the flapper valve to see if it’s damaged or not sealing properly. You can also adjust the water level in the toilet tank. If neither of these things works, it’s best to call a plumber.

6. Sewer System Backup

A backed-up sewer can be a homeowner’s worst nightmare. It can make your home inhabitable due to the horrible smell it produces. In addition, backed-up sewage is a real health hazard as it can contain harmful bacteria and viruses.

Sewer backups are usually caused by a clog in the sewer line. This can be caused by things like tree roots, grease build-up, or even objects that have been flushed down the toilet.

This plumbing problem is one that you shouldn’t attempt to fix yourself. It’s best to call a professional to resolve the issue.

Tackle Plumbing Problems Promptly

While plumbing problems can be a pain, there are some things you can do to fix them yourself. However, if the problem is beyond your abilities, it’s always best to call a professional.

Are you in the market for professional plumbing services in Edmond and Oklahoma City? Get in touch with Above + Beyond Service Company today and schedule an appointment.